Welcome to Xinyida
Omron Production Recorder STC-FDR-SW01
Name: Omron Omron Production Recorder STC-FDR-SW01
Brand: Omron
Efficiently identify the cause of faults using cameras
Simple structure, easy integration, faster and more convenient
Workpiece damage on unmanned operation site
Master the unexpected movements of the robotic arm
When a malfunction occurs at an unmanned operation site that causes product damage, the staff have no way of understanding the "process of the malfunction" and have to spend a lot of time identifying the cause.
By using cameras to capture the operation status of robots corresponding to various production instructions, it is possible to grasp the situation when faults occur, analyze and identify the cause in a short period of time.
• Video recording begins: The production instruction signal of the PLC is used as a trigger
• Video recording range: based on production batches
Poor quality in aseptic production sites
Master the opening action of sterile equipment
At the work site where sterile equipment is used, relying solely on visual observation cannot grasp the situation at the moment of occurrence of defects, making it difficult to identify the cause.
We can use abnormal particle count values as triggering conditions to capture the device status before and after triggering, in order to identify the cause of poor quality.
• Video recording begins: signals from pre installed environmental measurement sensors are used as triggers
• Video recording range: Automatically capture the on-site conditions before and after detecting anomalies
Real time 'recording' of status changes
Automatic triggering, accurately restoring the fault moment
Based on the "camera external trigger input" issued by various sensors or PLCs, or the "TCP command trigger input" input to the computer, the device status can be captured for up to 60 minutes before and after the fault occurs. By viewing the video, the specific situation at the moment of the fault can be quickly confirmed.
【 Case 】 Particle abnormality triggers shooting
[Case] NG detection result triggers shooting
Multi purpose, suitable for different on-site needs
In addition to external triggering signals, it is also equipped with various triggering recording functions such as "time triggering", "motion detection", "benchmark image comparison", and a total of 7 functions including real-time recording with a maximum recording time of 1 year and 60 minute manual recording. Support remote real-time monitoring of device status, process review of production issues, handling (recall) of defective products when they flow out, and other on-site operations and process tracking.
Image changes trigger shooting
Being able to compare previously captured images, using "motion detection" (as shown in the following case) and "benchmark image comparison" to capture the situation before and after the fault occurred.
Remote monitoring and real-time recording
It can directly monitor the on-site situation remotely or record real-time videos for up to 1 year * 1.
Different cameras accurately record the cause of malfunctions
Over a hundred cameras to meet different needs.
Easy installation in narrow spaces
Adopting an ultra small head separation camera with a side length of 19mm, it can be installed in small spaces.
Capture subtle changes
Featuring a high resolution of 20.4 million pixels, it captures the device's state changes clearly.
Shoot high-speed production line
With an ultra-high frame rate of 400fps (using a single 400000 pixel camera), high-speed production lines can be captured.
Balancing overall and partial visuals
Omron not only offers a wide range of industrial camera options, but also allows for free combination of lenses and cameras. We also provide long cable cameras that meet the overall shooting needs of production sites. When used in conjunction with these devices, they can capture both overall and partial images simultaneously, allowing for more accurate fault analysis through comparison during playback.
Complete system, done in three steps!
【 STEP1 】 Preparation
Provide ready-made cameras and accompanying software for immediate use without programming.
With the help of a universal camera and accompanying image processing software, the system can be built without action verification and programming.
The existing sensors or PLC inputs on the production site can be used as triggering conditions to start recording immediately.
Note Up to 8 cameras can be used for simultaneous shooting. When connecting cameras, please equip the appropriate hub according to the specifications of the computer and the number of cameras connected.
*1. The available cameras are Omron industrial cameras STC series. Please refer to the sample for details.
【 STEP2 】 Installation
Install production recorder software and camera driver (SentechSDK) * 1 on a computer or IPC.
*1. Please visit the official website of Omron Sentech Co., Ltd. to download the latest version of the camera driver (SentechSDK) file and install it.
【 STEP3 】 Setting
Set camera parameters, recording conditions, and video storage location.
Service Commitment

One year quality assurance
From the date of purchase, there is a one-year quality guarantee

Professional after-sales team
All after-sales personnel have over five years of experience in assembling, debugging, and maintaining related products

Timely supply of spare parts
Received replacement request, provide matching parts within 24 hours

24-hour worry free and problem-solving
Contact the buyer within 2 hours and provide timely service to resolve equipment malfunctions within 24 hours

Worry free underwriting cooperation
All products are insured by Ping An Insurance for worry free cooperation, adding a layer of protection for your safe use
Online booking
Guess you like it
Related attachments
Related information
- Omron barcode detector: an intelligent tool to improve production line efficiency
- Weibo barcode detector: a key tool for improving product quality control
- What are the brands of barcode scanners?
- How to choose a Weber barcode detector?
- Good news! Xinyida Electronics has won the Excellence Award in the 2023 Science and Technology Innovation and Entrepreneurship Competition
Request Quote


Hotline

TEL

Add: Building C, Laidi Park, 188 Kaiyuan Avenue, Huangpu District, Guangzhou City, Guangdong Province

Follow wechat

Tiktok
Copyright © Guangzhou Xinyida electronic Technology Co., LTD 粤ICP备19072457号 Business license Powerby:300.cn SEO